Menu
Basket 0
Yamaha EMX7 Mixer Amp

Yamaha EMX7 Mixer Amp

EMX7

Yamaha

  • £727.00
Usually shipped within 2-3 working days

The Yamaha EMX7 was designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level.

Despite the compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want. 

FEATURES:

  • Powerful & High Efficiency Class-D Amplifier
  • High-Z input (channel 4) to connect guitars or basses directly
  • Flex 9 Graphic Equaliser
  • Comprehensive, professional 24 different effects
  • Yamaha Speaker presets
  • Metal chassis for extended operation and robustness

SPECIFICATION:

I/O

  • Inputs: TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
  • Phantom Power: +48 V
  • Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
  • Control and others: FOOT SWITCH : Effect Mute on/off

Bus

  • Stereo: 1, AUX: 2 (Including FX)

Input Channel Function

  • PAD: 30 dB (CH1-4)
  • Hi-Z: Supported (CH4)
  • HPF: 80 Hz, -12 dB/oct. (CH1–3)
  • COMP: 1-knob COMP (CH1–4)
  • EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving)
  • EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking)
  • EQ LOW: 100 Hz +15 dB / -15 dB (Shelving)

On-Board Processors

  • DSP: SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor

On-Board Amplifiers

  • Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
  • Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W

Level Meter

  • 2 × 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)

Frequency Response

  • Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz

Total Harmonic Distortion

  • Input to SPEAKERS: MIC/LINE =LINE (CH1–4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1–4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)

Hum & Noise Level

  • Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter)
  • Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)

Crosstalk

  • -85 dB (1 kHz, Measured with 1 kHz band pass filter)

Protection Circuit

  • Load protection: DC-fault
  • Amplifier protection: Over heat protection, Over current protection, Integral power protection
  • Power supply protection: Over heat protection, Over current protection

Power Requirements

  • AC 100-240V, 50Hz/60Hz

Power Consumption

  • 45 W (Idle) / 250 W (1/8 Power)

Physical & Dimensions

  • Height: 308mm
  • Width: 465mm
  • Depth: 325mm
  • Weight: 9.5kg

            Manufacturer: Yamaha


            We Also Recommend