Martin Exterior Wash 310

The Martin Exterior Wash™ 310 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges.

A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 310 is designed for superior colour mixing applications and is based on quad-colour premixed LEDs.

FEATURES:

• Powerful premixed LEDs
• Up to 8300 lumens at full white (RGBW)
• Six different beam angle options
• Internal power and control (DMX, RDM and OLED display)
• Rugged IP66 housing
• 0 – 100% intensity control

SPECIFICATION:

General

• Dynamic Effects
  • Intensity: 0 - 100%
  • Colour mixing: RGBW
• Control and Programming
  • Control systems: DMX, RDM
  • DMX channels: 4
  • Setting, addressing, standalone programming: Control panel with OLED display
  • Receiver: RS-485
  • Firmware update: Serial upload via DMX link
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
• Optics
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • Light source: RGBW quad-colour
  • LED Beam angle options: 10°, 14°, 22°, 41°, 61°, 14° x 61°

*Figure obtained under manufacturer's test conditions

• Photometric Data
  • Total luminous output: 8800 lumens
• Construction
  • Protection rating: IP66
  • Colour: Clear anodised (standard) , black or white (optional)
  • Housing: Cast aluminium
  • Effective Projected Area (EPA): 0.14 m² including snoot
  • Impact resistance: IK08 (with control panel display cover plate installed)
  • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
  • RoHS compliant
• Installation
  • Orientation: Any
  • Mounting: Adjustable yoke
  • Vertical aiming: TBA
  • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
• Connections
  • Power connection: 1.8 m (5.9 ft.) cable tail without connector
  • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
  • All cable entries: IP68 cable gland
• Electrical
  • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
  • Power supply unit: Integrated, auto-sensing multi-voltage
  • Power consumption, steady state, all LEDs at zero intensity: 7 W
• Typical Power and Current
  • 120 V, 60 Hz: 2.3 A, 280 W, PF 0.99
  • 230 V, 50 Hz: 1.2 A, 280 W, PF 0.98
  • Measurements made at nominal voltage. Allow for a deviation of +/- 10%
• Thermal
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 45° C (113° F)
  • Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F)
  • Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
  • Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

Physical & Dimensions

• Length: 283mm
• Width: 404mm
• Height: 439mm
• Weight: 19.0 kg

Manufacturer: Martin Professional