Basket 0

Avantone CK6 FET



  • £195.00
Usually shipped within 2-3 working days

The Avantone CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics but at a fraction of their cost! The rugged CK-6 microphone body and capsule assembly are precision machined of brass.

Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs. The CK-6 houses a 32mm gold-sputter thin Mylar capsule.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-6 mic is able to produce professional results with a clean sonic character.

Includes Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

The CK-6 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.


True Transformerless Condenser

Polar Pattern(s)

Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)

Frequency Response
35-20,000 Hz +/- 3.5dB

Output Impedance
<=200 Ohms

Maximum SPL
136dB (0.5% THD @1000Hz)

Equivalent Noise Level

Output Connector
Male XLR 3-pin

High-Pass Switch
80 Hz 6dB/octave

Attenuation Switch
-10 dB

Power Requirement
Standard 48 Volt Phantom / 5mA

Included Accessories
-Wooden Box in Metal Carrying Case

155mm x 46mm

.4 kg / .9 lb

Polished Nickel trim / Metallic Cabernet Red Body

Manufacturer: Avantone

We Also Recommend