Basket 0
Audio-Technica ATW-2110BP Lavalier System

Audio-Technica ATW-2110BP Lavalier System



  • £334.00
Usually shipped within 2-3 working days

Audio-Technica’s ATW-2110BP Wireless Lavalier System on channel 38 offers increased RF power for increased link stability.

Charging contacts on the transmitters allow easy operation with rechargeable batteries. The 12VDC bias voltage on both BNC antenna inputs allows operation with the ATW-B80 antenna booster or other active components.With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.

Automatic frequency scanning - standard on all 2000b Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000b Series offers another ease-of-use feature: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.

Main Features

  • ATW-R2100b receiver
  • ATW-T210a UniPak® body-pack transmitter
  • AT829cW cardioid condenser lapel microphone
  • Automatic frequency scanning
  • Up to 10 user selectable channels available
  • Tone Lock™ squelch function fights interference


        Overall System
        Operating Frequencies UHF band
        541.500 – 566.375 MHz (C Band)
        656.125 – 678.500 MHz (D Band)
        854.900 – 864.900 MHz (F Band)
        606.500 – 631.000 MHz (U Band)
        Number Of Channels 10 total
        Frequency Stability ±0.005%, Phase Lock Loop frequency control
        Modulation Mode FM
        Frequency Response 100 Hz to 15,000 Hz
        Operating Range 100 m (300') typical
        Operating Temperature Range 41° F (5° C) to 113° F (45° C)
        Receiving System True Diversity
        Image Rejection 55 dB nominal, 50 dB minimum
        Signal-To-Noise Ratio >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
        Sensitivity 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
        Total Harmonic Distortion ≤ 1% (at 1 kHz, ±20 kHz deviation)
        Audio Output Attenuator (ATTN) Unbalanced: 25mV (100k ohms load), 1/4" phone jack
        Balanced: 50mV (Attenuator; 0dB)
        12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type
        Antenna Input BNC-type 50 Ω – Bias voltage 12V DC, 60mA each
        Dimensions 210 mm x 44 mm x 162.2 mm (W x H x D)
        Weight 1.0kg
        Accessories Included Two flexible UHF antennas, rack mount adapters, AC adapters
        Belt Pack
        RF Power Output High: 30mW; Low: 10mW, nominal
        Spurious Emissions According to National Regulations
        Battery Type 1.5V AA alkaline or rechargeable AA NiMH (not included)
        Current Consumption 150 mA typical
        Battery Life Approximately 9 hours (low), 7 hours (high)
        Dimensions 66 mm x 92.3 mm x 22.5 mm (W x H x D)
        Net Weight 80g
        Manufacturer: Audio Technica

        We Also Recommend