Audio-Technica ATW-2110BP Lavalier System

Audio-Technica’s ATW-2110BP Wireless Lavalier System on channel 38 offers increased RF power for increased link stability.

Charging contacts on the transmitters allow easy operation with rechargeable batteries. The 12VDC bias voltage on both BNC antenna inputs allows operation with the ATW-B80 antenna booster or other active components.With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.

Automatic frequency scanning - standard on all 2000b Series wireless receivers - finds and sets the best available channel at the touch of a button. For those using multiple wireless systems simultaneously, the 2000b Series offers another ease-of-use feature: any of its 10 channels may be used together - eliminating confusing frequency groups and other frequency-coordination problems.

Main Features

• ATW-R2100b receiver
• ATW-T210a UniPak® body-pack transmitter
• AT829cW cardioid condenser lapel microphone
• Automatic frequency scanning
• Up to 10 user selectable channels available
• Tone Lock™ squelch function fights interference

Specifications

Overall System

• Operating Frequencies: UHF band
  • 606.500 – 631.000 MHz (U Band)
• Number Of Channels: 10 total
• Frequency Stability: ±0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Frequency Response: 100 Hz to 15,000 Hz
• Operating Range: 100 m (300') typical
• Operating Temperature Range: 41° F (5° C) to 113° F (45° C)

Receiver

• Receiving System: True Diversity
• Image Rejection: 55 dB nominal, 50 dB minimum
• Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
• Sensitivity: 20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
• Total Harmonic Distortion: ≤ 1% (at 1 kHz, ±20 kHz deviation)
• Audio Output Attenuator (ATTN): Unbalanced: 25mV (100k ohms load), 1/4" phone jack
• Balanced: 50mV (Attenuator; 0dB)
• 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz deviation, 100k ohm load, XLRM-type
• Antenna Input: BNC-type 50 Ω – Bias voltage 12V DC, 60mA each
• Dimensions
  • Height: 44mm
  • Width: 210mm
  • Depth: 162.2mm
• Weight: 1kg

Belt Pack

• RF Power Output: High: 30mW; Low: 10mW, nominal
• Spurious Emissions: According to National Regulations
• Battery Type: 1.5V AA alkaline or rechargeable AA NiMH (not included)
• Current Consumption: 150 mA typical
• Battery Life: Approximately 9 hours (low), 7 hours (high)
• Dimensions
  • Height: 92.3mm
  • Width: 66mm
  • Depth: 22.5mm
• Weight: 80g