Yamaha Rio3224-D2

The Yamaha Rio3224-D2 is a Dante-compatible I/O 5U rack, featuring 32 analogue inputs, 16 analogue outputs, and 8 AES/EBU outputs. 

FEATURES:

• Dante network protocol offers extensive flexibility for system setup and configuration
• Includes dual power supply units to reduce the chance of power loss
• Redesigned internal airflow to reduce fan noise
• Directly edit gain, high-pass filters, and phantom power settings from the I/O Rack interface
• Remote operation from the R Remote software
• Gain Compensation function

SPECIFICATION:

General

• Sampling frequency rate External: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm)
• Signal delay: Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec
• Total harmonic distortion: Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min.
• Frequency response: +0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz
• Dynamic range: 112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min
• Hum & noise level
  • Equivalent input noise: –128 dBu typ., Input Gain= Max.
  • Residual output noise: –88 dBu, ST master off
• Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz
• Power requirements: 100-240V, 50/60Hz
• Power consumption: 120W

Physical & Dimensions

• Height: 220mm
• Width: 480mm
• Depth: 368mm
• Weight: 13.5kg

Manufacturer: Yamaha