Crown's CDi 6000 is rugged, lightweight and offers unmatched value in its class.
The CDi Series amplifiers are professional tools designed and built for installed sound applications.
SPECIFICATION:
- Output Power with 0.5%
- THD: 2 ohm
- Dual (per channel): 1,600W with 1% THD, 4 ohm Dual (per channel): 1200W, 8 ohm Dual (per channel) 650W, 4 ohm Bridge-Mono: 3,200W with 1% THD, 70V Dual (per channel): 1,000W, 140V Bridge-Mono: 2,000W.
- Voltage Gain at 1kHz, 8 ohm rated output: 34.2 dB.
- Frequency Response: +0/–1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
- Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Dual mode, 4 to 16 ohms in Bridge-Mono mode.
- Sensitivity: 1.4V.
- Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A weighted).
- Damping Factor: Better than 500 from 20 Hz to 400 Hz.
- Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
- Input Stage: Input is electronically balanced and employs precision 1% resistors.
- Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
- Maximum Input Signal: +22 dBu typical.
- AC Line Voltage and frequency configurations available: 100V, 120V, 220-240V, 50/60 Hz.
- AC Line Current: 11.75A.
- At Idle: Draws no more than 45 watts.
- Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
Manufacturer: Crown
