Martin MAC Aura XB
90232100/ MAR1218
Usually shipped within 2-3 working days
The Martin MAC Aura XB takes an award-winning, innovative, compact LED wash light to the next level, incorporating many new features first introduced with the MAC Quantum Wash™.
Not only does the MAC Aura XB offer additional brightness, it also features a new superior colour mixing system and an optimised lens design for tighter beams and more even washes.
Martin's unique and patented Eye-candy Aura Effect™ is also part of the package.
FEATURES:
- Super-bright single-lens wash with fully premixed colour
- Broad colour palette, RGBW colour mixing
- Eye-candy Aura Effect™Uniform shades
- Built-in FX engine
- 10 to 60° uniform zoom
- 6000 Lumens output
- Rapid movement
- Compact, low weight design (6.5 kg)High efficiency, low power consumption, long lifetime
SPECIFICATION:
Physical
- Length (across yoke): 302 mm (11.9 in.)
- Width (across yoke): 302 mm (11.9 in.)
- Height (head straight up): 360 mm (14.2 in.)
- Weight (without accessories): 6.5 kg (14.4 lbs.)
Dynamic Effects
- Beam colour mixing: RGBW
- Aura (secondary lens array illumination) colour mixing: RGB
- Beam colour temperature control: CTO, variable 10 000 - 2500K
- Beam and aura electronic 'colour wheel' effect: 33 LEE-referenced colours plus white, variable-speed colour-wheel rotation effect and random colour
- Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
- Pre-programmed effects: Range of independent and synchronised
- Beam and Aura FX, two combinable
- Electronic dimming: Independent beam and aura, four dimming curve options
- Zoom: 10° - 60° (one-tenth peak angle)
- Pan: 540°
- Tilt: 232°
- Pan and tilt speed: Adjustable via onboard control panel and DMX
Control and Programming
- Control options: Independent or synchronised Beam and Aura control
- Control system: DMX, RDM
- Control resolution: 8-bit, with 16-bit control of pan & tilt
- DMX channels: 14/25
- Setting and addressing: Control panel with backlit graphic display
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Transceiver: RS-485
- Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box
Optics and Photometric Data
- Light source: 19x 15W RGBW LED Array System
- LED refresh rate: Beam 1200 Hz, Aura 4395 Hz
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- Total luminous output (wide, one-tenth peak): 6000 lumens
- Total luminous output (narrow, one-tenth peak): 4300 lumens
- Video compatibility: Designed for use with HD/high-speed video cameras *Figure obtained under manufacturer´s test conditions
Construction
- Colour: Black
- Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
- Protection rating: IP20
Installation
- Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
- Orientation: Any
- Minimum distance to combustible materials: 200 mm (8 in.) from fixture
- Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
- Location: Indoor use only, must be fastened to surface or structure
Connections
- AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket
- AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
- AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
- DMX data in/out: 5-pin locking XLR
Electrical
- Maximum power consumption: 400 W
- Power supply unit: Auto-ranging electronic switch mode
- AC power: 100-240 V nominal, 50/60 Hz
- Typical half-cycle RMS inrush current: 10.7 A
- Power consumption, all effects static, zero light output: <25 W
Typical Power and Current
- 100 V, 60 Hz: 359 W, 3.8 A, PF 0.99
- 120 V, 60 Hz: 355 W, 3.2 A, PF 0.99
- 208 V, 60 Hz: 350 W, 1.8 A, PF 0.97
- 230 V, 50 Hz: 349 W, 1.7 A, PF 0.95
- 240 V, 50 Hz: 349 W, 1.6 A, PF 0.95
- Measurements made at nominal voltage with all LEDs at full intensity.
- Allow for a deviation of +/- 10%.
Thermal
- Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Total heat dissipation (calculated, +/- 10%): 1230 BTU/hr.
Approvals
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
- EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
- US safety: UL 1573
- US EMC: FCC Part 15 Class A
- Canadian safety: CSA E598-2-17 (CSA E60598-1)
- Canadian EMC: ICES-003 Class A
- Australia/NZ: C-TICK N4241
Related Items
- Martin USB Duo™ DMX Interface Box: P/N 90703010
- Martin DMX 5.3 Splitter™: P/N 90758140
- Martin RDM 5.5 Splitter™: P/N 90758150
- Power Input Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F with, PowerCON TRUE1 NAC3FX-W, 1.5 m (4.9 ft.): P/N 11541513
- Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 0.7 m (2.3 ft.): P/N 11541514
- Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 1.5 m (4.9 ft.): P/N 11541512
- Power Relay Cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, PowerCON TRUE1 in/out connectors, 3.25 m (10.7 ft.): P/N 11541511
- Cable connector, PowerCON TRUE1 NAC3FX-W, female: P/N 05323416
- Cable connector, PowerCON TRUE1 NAC3MX-W, male: P/N 05343418
Manufacturer: Martin