Allen & Heath XB-14-2

The XB-142 offers a host of specialised broadcast features that normally come at a much higher price, including telephone communication (telco) channels, mic channel ON switch sensing, stereo channel start/cue outputs for playback device control, automatic muting of speaker outputs and much more.

XB-14-2 incorporates new features and styling based on feedback from the many broadcasters who have built their operations around the original XB-14.

With a wealth of routing options, dual stereo channels for up to 7 stereo sources, and the addition of a dedicated Audition bus, enhanced microphone preamps and stereo channel gain range,

XB-142 satisfies the demands of small radio and internet broadcasters as well as larger studios with multiple rooms. With no less than 27 logic I/O for remote control and 15 configuration switches, XB-142 is a highly flexible solution.

FEATURES: 

• 4 mic/line channels
• 4 Dual Source stereo channels
• 2 Telco channels
• HPF and 3-band, swept mid EQ on mono channels
• 2-band EQ on stereo channels
• Variable high pass / low pass filters on Telco channels
• Smooth-ride 100mm faders
• 2-stage, padless pre-amp design
• Fader-start sensing on mono channels
• Start/cue logic outputs on stereo channels
• External meter socket
• Separate headphones mix for engineer/producer and 2 guests
• Auto mutes on control room outputs
• Remote mute facility on mic channels
• Configurable USB stereo audio in/out
• Audition bus for auditioning and off-air recording
• Aux and separate stereo busses for processing/recording
• XLR main outputs with inserts
• Input signal and peak metering

SPECIFICATION: 

General

• Input
  • Mono channel Mic input (XLR) +6 to –63dBu for nominal (+17dBu in max)
  • Mono channel Line input (TRS Jack socket) +10 to –26dBu (+30dBu maximum)
  • Insert point (TRS Jack socket) 0dBu nominal +21dBu maximum
  • Stereo input (TRS Jack sockets) 0dBu nominal (control = Off to +10dB)
  • Stereo input (RCA phono sockets) 0dBu nominal (control = Off to +10dB)
  • Telco channel input (XLR) +10 to –26dBu (+30dBu maximum)
  • External monitor inputs (RCA phono sockets) 0dBu Nominal
• Output
  • PGM L & R outputs (XLR) +4dBu nominal. +25dBu maximum.
  • PGM Mono output (RCA phono) 0dBu nominal. +21dBu maximum.
  • PGM L & R inserts (TRS jack sockets) -2dBu nominal. +21dBu maximum
  • Aux output (Jack socket) 0dBu nominal. +21dBu maximum.
  • Mix B outputs (RCA phono sockets) 0dBu nominal. +21dBu maximum.
  • Audition outputs (RCA phono sockets) 0dBu nominal. +21dBu maximum.
  • Telco output (XLR) 0dBu nominal. +21dBu maximum.
  • CRM Speaker outputs (RCA phono sockets) 0dBu nominal. +21dBu maximum. 
• THD+n
  • Mic in to PGM L/R Out, 0dB gain, 1kHz, +10dBu out <0.01%
  • Mic in to PGM Out, 30dB gain, 1kHz, +10dBu out <0.01%
  • Line in to PGM L/R out 0dB gain, 1kHz, 0dBu out <0.01%
  • Stereo in to PGM out 0dB gain, 1kHz, +10dBu out <0.01%
• USB Audio CODEC (Coder/Decoder)
  • USB Audio In/Out USB 1.1 compliant 16bit.
  • Sample Rate 32, 44.1, or 48kHz
• Noise
  • Mic Pre EIN @ max gain 150R input Z 22-22kHz -124dBu
  • PGM out, PGM fader = 0, 22-22kHz < -100dBu
  • Audition out, Mix B out = 0, 22-22kHz < -100dBu
  • Aux out, Mono out = 0, 22-22kHz < -85dBu 
• Headroom
  • Analogue Headroom from nominal (0Vu) Outputs 21dB
  • USB in & out headroom from nominal (0Vu) 14dB
  • Analogue Headroom from nominal (0Vu) Mix point 24dB
• Crosstalk & Attenuation (dB 22-22kHz)
  • Mono fader attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-95
  • Mono ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-95
  • TELCO fader attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-95
  • TELCO ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-95
  • Stereo fader attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-90
  • Stereo ON switch attenuation (dB relative to +10dBu) 1kHz/10kHz -95/-95
  • PGM fader attenuation (dB relative to +10dBu) 1kHz/10kHz -100/-95
  • TELCO clean-feed isolation from I/P (dB relative to +10dBu) 1kHz/10kHz -55/-40
  • Stereo separation, L in to PGM R out. dBr 1kHz/10kHz -70/-50 
• Frequency Response
  • Mic in to PGM L/R Out, 30dB gain +0.5/-1dB 10Hz to 30kHz.
  • Line in to PGM L/R out 0dB gain +0.5/-1dB 10Hz to 30kHz
  • Stereo in to PGM L/R out +0.5/-1dB 10Hz to 30kHz

Physical & Dimensions

• Height: 103mm
• Width: 385mm
• Depth: 465mm
• Weight: 7.5kg

Manufacturer: Allen & Heath