Avantone CK-7

The rugged CK-7 microphone body and capsule assembly are precision machined of brass. 

With it's cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track.

This microphones figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches.

With a -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Specifications:

Type
True Condenser

Polar Pattern(s)
Cardioid , Omni , Figure 8

Capsule
Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)

Frequency Response
20-20,000 Hz +/- 3dB

Output Impedance
<=250 Ohms

Maximum SPL
139dB (0.5% THD @1000Hz)

Sensitivity
-38 dB (0 dB=1V/Pa)

Equivalent Noise Level
(A-Weighted per IEC 286-4) < 16 dB

Output Connector
Male XLR 3-pin

High-Pass Switch
80 Hz 6dB/octave

Attenuation Switch
-10 dB

Power Requirement
Standard 48 Volt Phantom / 5mA

Included Accessories
-Shockmount
-Wooden Box in Metal Carrying Case

Dimensions
187mm x 51mm / 7.5" x 2"

Weight
.65 kgs / 1.4 lbs

Finish
Polished Nickel trim / Metallic Cabernet Red Body

Manufacturer: Avantone