Menu
Basket 0
Audio-Technica AT8035 Shotgun Mic

Audio-Technica AT8035 Shotgun Mic

AT8035

Audio-Technica

  • £263.00
Usually shipped within 2-3 working days

The AT8035 is ideal for videos and movies but should be installed outside of the image, in other words, out of camera range. This type of microphone, provided with an interference tube in front of the capsule, which cancels a large part of its off-axis.

Audio-Technica's Line and Gradient Condenser Microphones combine a directional capsule ("gradient") and an interference tube which removes the sound from the rear.

Generally, the interference tube of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Short condenser microphones do not have as long a range as shotgun models, but in some cases are preferred for their greater acceptance angle, when the accuracy of the source is less important.

Product Features

  • 369mm Shotgun Microphone, designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Captures sound with high intelligibility in noisy environments with its excellent sound rejection from the sides and rear of mic
  • Two power modes (battery or phantom power) for versatility
  • 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
  • Effective protection against interference from nearby mobile phones and other unwanted radio frequencies
  • Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carry case Line & Gradient

                              Product Specifications 

                              Element Fixed-charge back plate, permanently polarized condenser
                              Polar Pattern Line + gradient
                              Frequency Response 40-20,000 Hz
                              Open Circuit Sensitivity Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
                              Impedance Phantom: 250 ohms Battery: 300 ohms
                              Maximum Input Sound Level Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
                              Low Frequency Roll Off 80 Hz, 18 dB/octave
                              Switches Flat, roll-off
                              Dynamic Range Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
                              Signal-to-Noise Ratio 72 dB, 1 kHz at 1 Pa
                              Phantom Power Requirements 11-52V DC, 2 mA typical
                              Battery Type 1.5V AA/UM3
                              Battery Current/Life 0.4 mA / 1200 hours typical (alkaline)
                              Weight 170 g (6,0 oz)
                              Dimensions 369.0 mm (14.53") long, 21.0 mm (0.83") diameter
                              Output Connector Integral 3-pin XLRM-type
                              Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8132 windscreen; battery; protective carrying case
                              Manufacturer: Audio Technica

                              We Also Recommend