Menu
Basket 0

RME HDSPe MADI FX

RME-HDSPE-MADI-FX

RME

  • £1,369.00
Usually shipped within 2-3 working days

The HDSPe MADI FX features 390 audio channels! Three MADI I/Os, two optical and one coaxial are accompanied by one AES/EBU I/O and one analogue monitoring output.

To complete the feature set, a Word Clock connection and four MIDI I/Os were added.

The complete technology and connectivity are highly integrated into the smallest possible amount of space - typical for RME. Only one PCIe slot is required on the motherboard, plus one free slot opening on the case.

FEATURES:

  • PCI Express Interface
  • 194 input / 196 output channels = 390 channels
  • 3 x MADI I/O (2 x optical + 1 x coaxial)
  • AES/EBU I/O (via breakout cable)
  • 3 x virtual MIDI I/O over MADI
  • 1 x MIDI I/O via 5-pin DIN (breakout cable)
  • Stereo Analogue Out
  • Word Clock I/O
  • TotalMix FX with 192 kHz effects engine

SPECIFICATION:

  • 1-Lane PCI Express Endpoint device (no PCI Express to PCI Bridge), revision 1.1.
  • 2.5 Gbps line speed
  • Packet-based full-duplex communication (up to 500 MB/s transfer rate)
  • All settings changeable in real-time
  • Automatic and intelligent master/slave clock control
  • Sync sources: MADI coaxial, MADI optical, AES/EBU, word clock, internal
  • Varipitch: by input signal or word clock
  • Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, variable (Sync/word clock)
  • Sample rate range: MADI: 32 kHz - 96 kHz, word clock: 27 kHz - 200 kHz
  • Jitter: < 1 ns, internal and all inputs
  • Jitter sensitivity: PLL operates even at 100 ns Jitter without problems
  • Comes with DIGICheck: the ultimate measurement, analysis and test tool
  • Input word clock: Signal Adaptation Circuit (functional from 1.2 Vpp input signal), switchable termination
  • Output word clock: BNC, low-impedance driver stage, 4 Vpp into 75 Ohms, short-circuit-proof
  • MIDI input and output: via two 5-pin DIN jacks

            Stereo Monitor Output (Phones):

            • Signal-to-Noise (DR): 110 dB RMS unweighted, 113 dBA @ 44.1 kHz
            • Channel separation: > 100 dB
            • Output: 6.3 mm TRS
            • Output impedance: 75 Ohm
            • Output level at 0 dBFS: +13 dBu

                Manufacturer: RME


                We Also Recommend