Menu
Basket 0
QSC KLA12 & KLA181 PA Package

QSC KLA12 & KLA181 PA Package

QSC KLA12 & KLA PA Package

QSC

  • £12,480.00
Usually shipped within 2-3 working days

This QSC Active PA Speaker Package consists of x4 KLA12 Active Array PA Speakers and x2 KLA181 active subwoofers.

The KLA12 features a highly efficient 500 watt by 500 watt power amp module and the KLA 181 offers the same highly efficient power amp module in a 1,000 watt configuration.

This efficient design enables up to five KLA models (any combination of KLA12 and KLA181) to be driven off of a single 15 amp, 120 volt electrical circuit.

These KLA loudspeakers incorporate QSC's DEEP™ DSP algorithm - providing extended bass response by actively managing potentially damaging low-frequency transients - and GuardRail™ circuitry protection which prevents the amplifier module from unnatural and destructive clipping.

As an energy saving feature, the Auto Standby mode automatically engages after five minutes of inactivity but upon resumption of audio signal, the power module on the KLA will awaken instantly for immediate output.

In an installed application, multiple KLA Series loudspeakers can be "daisy-chained" for total gain control from a single remote pot wired to the on-board Phoenix-style connector. Additional power module characteristics on KLA include a balanced, line-level XLR input in parallel with an XLR "Thru" connector, PowerCon™ In and Thru connectors, Attenuation Control and LED indicators for Signal, Limit, Power and Standby status.

Please note: Speaker Mount Poles and Audio cables are an optional extra! 

FEATURES:

KLA12 Active Array

  • 500 W + 500 W power module
  • Rugged, ABS enclosure delivers light-weight durability
  • SOLO™ Rigging System supports deployment without tools or external hardware
  • Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
  • 10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 × KLA12 and 2 × KLA181
  • 90° × 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
  • High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
  • Extensive DSP further enhances and protects performance
  • 1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
  • powerCON® Input and Thru connections
  • Tilt-Direct™ pole mount assists directivity in single-unit applications

KLA181 Active Subwoofer

  • 1,000 watt power module
  • 18" vented subwoofer
  • High acoustic output (135 dB SPL peak)
  • Frequency range down to 33 Hz (-10 dB)
  • Extensive DSP further enhances and protects performance
  • powerCON® Input and Thru connections
  • Threaded pole receptacle for free-standing applications 
  • Suspension made possible via M10 fittings or KLA12AF Array Frame
  • Integrated threaded pole mount supports up to two KLA12 enclosures 

                                      SPECIFICATION:

                                      KLA12 Active Array

                                      • Configuration:  Multipurpose 2-way
                                      • Transducers:  High Frequency:  1.75” diaphragm compression driver   |   Low Frequency:  12” cone transducer
                                      • Frequency Response (-6 dB):  49 Hz - 18 kHz
                                      • Frequency Range (-10 dB):  44 Hz - 20 kHz
                                      • Nominal Coverage:  90° H x 18° V
                                      • Maximum SPL (1 meter):  131 dB peak
                                      • Amplifiers
                                        • Power Output:  HF: 500 W Class D continuous  |  LF: 500 W Class D continuous
                                        • Input Impedance:  XLR: 40 kΩ balanced / 20 kΩ unbalanced
                                        • Controls:  Power, Attenuation, LF Setting (External Sub/Normal/DEEP™), Array Size (1-5), Front LED (Pwr/Limit/Off)
                                        • Indicators:  Power, Signal, Standby, Limit
                                        • Cooling:  On demand, 50 mm variable speed fan
                                        • Amplifier Protection:  Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
                                        • Transducer Protection:  Thermal limiting, excursion limiting
                                        • AC Power Input:  Universal power supply 100–240 VAC, 50 to 60 Hz
                                        • AC Power Consumption (1/8 Power):  100 VAC, 2.3 A  |  120 VAC, 2.01 A  |  230 VAC, 1.13 A
                                      • Connectors
                                        • Balanced female XLR line level input
                                        • Balanced male XLR full range line level out
                                        • Remote attenuation control
                                        • Locking powerCON power connector AC In
                                        • Locking powerCON® power connector AC Out

                                      Physical & Dimensions

                                      • Material:  Impact resistant ABS
                                      • Finish:  Black 
                                      • Grille:   Rugged powder coated steel grille
                                      • Dimensions (HWD):  382 x 594 x 422mm
                                      • Net Weight:  25 kg

                                      KLA181 Active Subwoofer 

                                      • Configuration:  18" subwoofer
                                      • Transducers:  Low Frequency:  18" cone transducer
                                      • Frequency Response (-6 dB):  38 Hz
                                      • Frequency Range (-10 dB):  33 Hz
                                      • Maximum SPL (1 meter):  135 dB peak
                                      • Amplifiers
                                        • Power Output:  1000 W Class D continuous
                                        • Input Impedance:  XLR: 40 kΩ balanced / 20 kΩ unbalanced
                                        • Controls:  Power, Attenuation, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off)
                                        • Indicators:  Power, Signal, Standby, Limit
                                        • Cooling:  On demand, 50 mm variable speed fan
                                        • Amplifier Protection:  Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
                                        • Transducer Protection:  Thermal limiting, excursion limiting
                                        • AC Power Input:  Universal power supply 100–240 VAC, 50 to 60 Hz
                                        • AC Power Consumption (1/8 Power):  100 VAC, 2.3 A  |  120 VAC, 2.01 A  |  230 VAC, 1.13 A
                                      • Connectors
                                        • Balanced female XLR line level input
                                        • Balanced male XLR full range line level out
                                        • Remote attenuation control
                                        • Locking powerCON power connector AC In
                                        • Locking powerCON® power connector AC Out

                                      Physical & Dimensions

                                      • Material:  Painted birch plywood
                                      • Finish:  Black 
                                      • Grille:   Black powder coated 16 gauge steel
                                      • Dimensions (HWD):  547 x 586 x 633mm
                                      • Net Weight:  45.3 kg

                                      What's in the Box:

                                      KLA12 Active Array

                                      • Quick-Start Guide
                                      • Warning Information Sheet
                                      • KLA12 Speaker Assembly
                                      • AC powerCON® Power Cord (CEE 7/7), 3.6 Meter
                                      • AC powerCON® Power Cord (NEMA 5-15 - USA style), 12 Foot
                                      • XLR Audio Loop-thru Cable, 2 Foot
                                      • powerCON® Loop-thru Power Cord, 2 Foot
                                      • Euro-style Connector Plug, 3-pin

                                      KLA181 Active Subwoofer 

                                      • Quick-Start Guide
                                      • Warning Information Sheet
                                      • KLA181 Subwoofer Assembly
                                      • AC powerCON® Power Cord (CEE 7/7), 3.6 Meter
                                      • AC powerCON® Power Cord (NEMA 5-15 - USA style), 12 Foot
                                      • XLR Audio Loop-thru Cable, 3 Foot
                                      • powerCON® Loop-thru Power Cord, 3 Foot
                                      • Hex Key, 6 mm
                                      • Euro-style Connector Plug, 3-pin

                                        Manufacturer: QSC


                                        We Also Recommend