Basket 0
Martin THRILL Vertical Fogger

Martin THRILL Vertical Fogger


Martin Professional

  • £379.00
Usually shipped within 2-3 working days

Martin's Thrill Vertical Fogger is an atmospheric fog machine that features built-in LED lights capable of producing high velocity 7 m (25 ft.) high plumes of coloured fog that simulate pyrotechnical effects, CO² style jets, or “cryo” white dense cloud effects.  

Fire this machine up and your party, show, event or business presentation is bound to draw attention. Get maximum attention when you instantly fill the room with a hefty blast of fog, light and simulated jet noise. 

With 21 bright R/G/B LEDs, the THRILL Vertical Fogger offers virtually limitless colour mixing. Beyond just lights and fog, the nozzle is designed to produce a boisterous noise simulating a natural fissure in the earth creating an astonishingly real “volcanic” effect.

You can link multiple units for even bigger impact. Control is simplified with the included 4-channel wireless remote control or via DMX for more advanced users.

THRILL Vertical Fogger adds a dramatic flair to any band performance or DJ/club setup, and makes an unforgettable impression during product presentations, sports team entrances or other ceremonies.


  • Fog effects at most any angle including upside-down
  • 1,400 W heat exchanger produces 480 m³ (17,000 ft³) per min. fog output
  • Rapid 8-minute ready time
  • 2.5 l fluid reservoir for less frequent fill-ups
  • Create ambience with 21 x 3 W single LEDs (7 each R, G, B)
  • 36 vibrant pre-programmed colours
  • Wireless 4-channel remote control included for fast and easy operation
  • DMX operable for individualised control and design
  • Included adjustable bracket for mounting
  • Common IEC mains inlet – mains cable included by region



    • Dynamic Effects
      • Colour mixing: RGB
      • Colour selection: 36 colour presets
      • Electronic dimming: 0 - 100%
      • Strobe and pulse effects: Variable speed and action, random strobe
      • Electronic 'shutter' effect: Instant open and blackout
      • Fog: On/Off
    • Performance
      • Coverage volume: 480 m3 (17,000 ft3) per minute
      • Maximum fluid consumption: 60 ml per minute
      • Maximum operating time at full output: 30 seconds
      • Ready time: 8 minutes
    • Control and Programming
      • Control options: DMX, 4-channel wireless remote control, push button on/off
      • Control parameters with wireless remote: On/off operation
      • Control parameters with DMX: Full-featured
      • DMX channels: 7
      • User interface: Control panel with LED display
      • DMX compliance: ANSI E1.11 - USITT DMX512-A
    • Optics
      • Light source: 21 x 3 W LEDs (7 each R, G, B)
      • Minimum LED lifetime: 30 000 hours (to >70% luminous output)*

    *Figure obtained under manufacturer's test conditions

    • Construction
      • Housing: Steel
      • Colour: Black
      • Heat exchanger: 1400 W, thermally protected
      • Fluid pump: Oscillating piston, high pressure
      • Fluid management: Fluid out sensing, sight glass
      • Fluid reservoir: 2.5 litre, removable
      • Hanging bracket: Integrated adjustable yoke
      • Safety attachment points: 2-threaded inserts, front/side (M8 eye-bolt included)
      • Wireless remote control unit (included): 4-channel, 30 m (100 ft.) range
    • Installation
      • Mounting: Standing or hanging
      • Orientation: Up to +/- 45° from horizontal
      • Mounting points: Bracket for single/double rigging clamp, M12 or ½”
      • Clearance around machine: 600 mm (24 in.)
    • Connections
      • AC power: IEC male inlet, C14
      • DMX: 3- and 5-pin locking XLR
      • Wireless remote receiver: DIN 41524, 5-pin, 45°, 180° inlet
    • Electrical
      • AC power: 220-240 V nominal, 50/60 Hz
      • Main fuse: F 8 AL, 250 V
      • Typical power and current at 220 V: 1280 W, 5.8 A*
      • Typical power and current at 240 V: 1520 W, 6.3 A*

    *Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

    • Thermal
      • Maximum ambient temperature (Ta max.): 40° C (104° F)
      • Minimum ambient temperature (Ta min.): 5°C (41°F)
      • Exterior surface temperature, steady state: 50°C (122°F)
      • Maximum nozzle temperature: 300° C (572°F)

    Physical & Dimensions

    • Length: 455mm
    • Width: 311mm
    • Height: 199mm
    • Height with hanging bracket: 351mm
    • Weight, dry: 9.5kg
    • Weight, filled: 12kg

    What's in the Box

    • Fluid reservoir, 2.5 l
    • Hanging bracket and hardware
    • M8 x 15 mm safety eye-bolt
    • Power cable, EU, 10 A, IEC C13 female, moulded Schuko plug, 1.2 m (4 ft.)
    • Wireless transmitter, 4-channel: P/N 50480853
    • Wireless receiver, black, Vertical Fogger
    • Battery for wireless transmitter, 12 V, A23

                                    Manufacturer: Martin 

                                    We Also Recommend