Menu
Basket 0
Lavry AD11 A/D Mic Pre Amp

Lavry AD11 A/D Mic Pre Amp

AD11

Lavry

  • £2,016.00
Usually shipped within 2-3 working days

The AD11 is a stereo A to D converter which offers USB connectivity, making it ideal for everything from archival to recording.

This converter includes built-in microphone preamplifiers with phantom power, large wide-range LED meters, and Lavry’s exclusive digital tape saturation emulation (“Soft Saturation”) for hotter recordings with peak level control.

The USB output is available in parallel with both XLR and RCA AES/SPDIF digital audio outputs, so more than one recording or monitoring device can be fed directly from the AD converter. For dual-mono operation, the MicPre or +4dBu/-10dBV line level input function and phantom power are selectable on each channel, as well as Soft Saturation. 

KEY FEATURES

  • Recording at 44.1, 48, 88.2 or 96 kHz with 24 bit word length
  • Super-stable internal clock
  • External clocking via word clock or AES sync
  • BNC Word Clock output for synchronising other gear to the AD11
  • Digital output format selectable between AES/EBU and IEC (SPDIF)
  • Peak hold selectable on large wide range LED meters
  • Soft Saturation for peak level control without time constants (allows signal to be compressed or limited without undesirable interaction due to different attack and release times)
  • Included XLR to RCA adapter
  • Optional Rack Mount Kit (can be used to mount any combination of two LavryBlack units)

    SUITABLE FOR

    • Archiving
    • Tracking
    • Location Recording
    • Mixing
    • Overdubs
    • Mastering
    • Broadcast
    • Live/Location Sound
    • Post Production

    SPECIFICATION:

    ANALOGUE INPUT

    • Input connections for Line Level:
      • XLR input:
        • Balanced analogue: Pin 2 non-inverting, Pin 3 Inverting. Pin 1 shield
        • Unbalanced analogue: Pin 2 non-inverting, Pin 3 signal return, Pin 1 shield
      • ¼” input:
        • Balanced analogue TRS: Tip non-inverting, Ring inverting, Sleeve shield
        • Unbalanced analogue TS: Tip non-inverting, Sleeve signal return and shield
    • Input connections for Low Impedance Balanced Microphone
      • uses same XLR inputs as Line Level
    • Transformer-free electronically balanced Pin 2 “+” XLR inputs.
    • Phantom Power:
      • +48 volts Phantom power for condenser microphones, can be enabled or disabled for each input channel individually using front panel setting.

    DIGITAL OUTPUT

    • XLR:
      • Connect to AES inputs using standard 110 ohm XLR to XLR cables.
      • Connect to coaxial SPDIF inputs using XLR to RCA adapter or adapter cable.
      • Output format set by front panel setting to either AES or “SPDIF” (IEC 60958 type II Consumer format). Output is always 24 bit Wordlength.
    • RCA:
      • Connect to SPDIF/RCA inputs using standard 75 ohm RCA to RCA cables.
      • Connect to XLR inputs using RCA to XLR adapter or adapter cable.
      • Output format set by front panel setting to either AES or “SPDIF” (IEC 60958 type II Consumer format). Output is always 24 bit Wordlength.
    • USB:
      • Connects to computer using standard USB cable.
    • Requires USB 2.0 or above.

      PHYSICAL

      • Dimensions: 8”w x 1.75”h x 10.75” d (including front panel switches and rear panel connectors)
      • Weight: less than 5lbs, 6lbs in box
      • An optional Rack Mount Kit is available which can be used to mount any combination of two LavryBlack units in a 1U 19” rack space. Please note that this kit cannot be used to rack mount a single LavryBlack unit.

      Manufacturer: Lavry


      We Also Recommend