JBL Control 62P 2.5" Pendant SpeakerJBL1090
Ideal for visually sensitive applications, The Control 62P 2" driver is great for speech and mid-high music applications (external high-pass required).
For full-range, wide bandwidth performance, up to 4 pieces can be driven from a Control 50 S/T or 40 CS/T subwoofer.
- 60mm driver, ideal for speech and mid-high music applications
- Can drive 2 or 4 pieces from Control 50S/T for full-range, wide bandwidth performance
- Can intermix with Control 52 surfacemount and Control 42C in-ceiling satellite speakers
- Hanging hardware with 4.5 m galvanized steel cable
- Easy to adjust clamp
- Black coloured
- Priced and Sold Individually
- Frequency Response (-10 dB): 150 Hz – 20 kHz
- Frequency Range (±3 dB): 200 Hz – 17 kHz
- Power Capacity:
- 50 Watts Continuous Program Power (2 hrs)
- 25 Watts Continuous Pink Noise (2 hrs)
- 30 Watts Continuous Program Power (100 hrs)
- 15 Watts Continuous Pink Noise (100 hrs)
- Nominal Sensitivity:
- 87 dB (4.0 V, 1 W)
- 84 dB (2.83 V)
- Nominal Coverage Angle: 140° (+25°/-50°)
- Directivity (Q): 4.7
- Directivity Index (DI): 6.2 dB
- Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
- Rated Impedance: 16 ohms (no transformer taps)
- Recommended High-Pass Frequency: 150 Hz
- Transducer: Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.
- Enclosure Material: High impact polystyrene
- Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
- Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.
- Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
- Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanised-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
- Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
Physical & Dimensions
- Diameter: 128mm
- Height to top of cabinet: 121mm
- Height to top of suspension bracket: 141mm
- Weight: 0.7kg