Basket 0
Audio-Technica U891RWX

Audio-Technica U891RWX



  • £265.00
Usually shipped within 2-3 working days

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891RWX cardioid condenser boundary microphone features an activation switch that can be set to three modes: press-on/press-off, press to talk, and press to mute.

The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise.

The microphone’s heavy die-cast case and silicon foam bottom pads minimise coupling of surface vibration to the microphone. The unit’s self-contained electronics eliminate the need for an external power module.

Product Features

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
  • An activation switch can be set to any of three operating modes: “touch-on/ touch-off,” “touch-to-talk” and “touch-to-mute”
  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
  • Improved switch design
  • Available in two colours: black (U891Rx) and white (U891RWx)

      Product Specifications 

      ELEMENT Fixed-charge back plate, permanently polarized condenser
      POLAR PATTERN Half-cardioid
      (cardioid in hemisphere above mounting surface)
      FREQUENCY RESPONSE 30-20,000 Hz
      LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave
      OPEN CIRCUIT SENSITIVITY –34 dB (19.9 mV) re 1V at 1 Pa
      IMPEDANCE 200 ohms
      MAXIMUM INPUT SOUND LEVEL 130 dB SPL, 1 kHz at 1% T.H.D.
      DYNAMIC RANGE (typical) 104 dB, 1 kHz at Max SPL
      SIGNAL-TO-NOISE RATIO 68 dB, 1 kHz at 1 Pa
      PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical
      SWITCHES Activation: on/off;
      Switch function: press on/off,
      momentary on, momentary off;
      Flat, roll-off
      WEIGHT 264 g (9.3 oz)
      DIMENSIONS 108.0 mm (4.25") maximum length,
      84.0 mm (3.31") maximum width,
      23.0 mm (0.91") maximum height
      CABLE 7.6 m (25.0') long, 3.2 mm (0.13")
      diameter, 2-conductor, shielded cable with
      TA3F-type and XLRM-type connectors
      UE-H hypercardioid (100°)
      ACCESSORY FURNISHED Soft protective pouch
      Manufacturer: Audio Technica

      We Also Recommend