Basket 0
Audio-Technica BP4025 X/Y

Audio-Technica BP4025 X/Y



  • £564.00
Usually shipped within 2-3 working days

Unlike most X/Y stereo microphones where the capsules form a 90° stereo image, the BP4025 has ingenious arrangement of its large capsules for stereo more "realistic" 120° image.

The two capsules are mounted back-to-back on the same electronic circuit.

This is a unique configuration of coincident large diaphragm capsules for impeccable sound quality and exceptionally low noise level.

The audio reproduction thanks to the excellent channel separation is natural and powerful to give the listener the impression of being there when the audio was recorded.

Product Features

  • Unique configuration of large-diaphragm capsules offer pristine sound quality and exceptionally low noise
  • Natural and powerful sound reproduction
  • Innovative coincident capsule configuration produces accurate stereo image in smaller housing
  • Compact, lightweight design is ideal for camera-mount use, but can also be used in the studio
  • Excellent channel separation
  • Phantom power operation for use with professional equipment
  • Diaphragms are 24.3mm diameter and a thickness of 2 microns
  • 155 dB SPL, with 10 dB pad (nominal)
  • Switchable low-frequency roll-off and 10 dB pad
  • 80Hz Low cut filter with a slope of 12dB/octave
  • Low self noise (14dB)
  • Includes one balanced cable (5-pin XLRM at the microphone end and two 3-pin XLRM-type connectors at output end)

          Product Specifications

          Element Fixed-charge back plate permanently polarized condenser
          Polar Pattern X/Y Stereo
          Frequency Response 20 - 17,000 Hz
          Open Circuit Sensitivity -32 dB (25.1 mV) re 1V at 1 Pa
          Impedance 170 ohms
          Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
          Channel Balance < 2.5 dB
          Low Frequency Roll Off 80 Hz, 12 dB/octave
          Switches Flat, roll-off; 10 dB pad (nominal)
          Dynamic Range 131 dB, 1 kHz at Max SPL
          Signal-to-Noise Ratio 80 dB, 1 kHz at 1 Pa
          Phantom Power Requirements 11-52V DC, 7 mA typical (both channels total)
          Weight 269 g (9.5 oz)
          Dimensions 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
          Output Connector Integral 5-pin XLRM-type
          Cable 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
          Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch

          Manufacturer: Audio Technica

                                    We Also Recommend