Basket 0
Audio-Technica ATW-2410A Rack System CH38

Audio-Technica ATW-2410A Rack System CH38



  • £1,849.00
Usually shipped within 2-3 working days

The Audio-Technica ATW-2420A 2000a series rack wireless system with x4 AT829cW lapel microphones provides a solution for those looking for a wireless system that is already racked and can be used straight away from purchase. 

This system comes with a padded shoulder bag for safely storing the mics and belt pack transmitters.

All system settings are pre-programmed into the units so you can plug in, turn on and immediately enjoy premium sound quality in a compact, portable package.

Please note: The product image which has been used is for illustration purposes only, this system will include x4 AT829cW lapel microphones (not pictured), x4 body-pack transmitters (not pictured) and x4  ATW-R2100a receivers (not pictured) 

Main Features

  • x4 AT829cW lapel microphones 
  • x4  ATW-T210a body-pack transmitters
  • x4  ATW-R2100a receivers
  • 2000a series systems on channel 38 
  • Wireless system that is already racked
  • Can be used straight away from purchase
  • ATW-DA49 distributor
  • AEW-TB44 transmitter storage bag
  • All pre-racked into a 4U rack box
Overall System Specs
  • Operating Frequencies: UHF band
  • 606.500 – 629.900 MHz (U Band – ch.38)
  • 856.100 – 864.900 MHz (F Band)
  • Number Of Channels: 10 total
  • Frequency Stability: ±0.005%, Phase Lock Loop frequency control
  • Modulation Mode: FM
  • Operating Range: 100 m (300') typical
  • Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
  • Frequency Response: 100 Hz to 15,000 Hz
Receiver Specs
  • Receiving System: True diversity
  • Image Rejection: 55 dB nominal, 50 dB minimum
  • Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
  • Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
  • Sensitivity: 20dBuV (S/N 60dB at 5 kHz deviation, IEC-weighted)
  • Audio Output: Unbalanced: 25mV (100k ohms load), 1/4" phone jack
  • Balanced: 50mV (Attenuator; 0dB)
  • 12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz
  • deviation, 100k ohm load, XLRM-type
  • Antenna Input: BNC-type 50 Ohms – Bias voltage 12V DC, 60mA each
  • Dimensions: 210 mm x 44 mm x 162.2 mm (W x H x D)
  • Weight: 1.0kg (2.2 lbs)
  • Accessories Furnished: Two flexible UHF antennas, rack mount adapters, AC adapters
  • Optional System Accessory: AT8630 joining-plate kit, mounts two ATW-R2100a receivers in single 19" rack space
Body-Pack Transmitter Specs
  • RF Power Output: High: 30mW; Low: 10mW, nominal
  • Spurious Emissions: According to National Regulations
  • Batteries: Two 1.5V AA alkaline or rechargeable AA NiMH (not included)
  • Current Consumption: 150 mA typical
  • Battery Life: Approximately 9 hours (low), 7 hours (high)
  • Dimensions: 66 mm x 92.3 mm x 22.5 mm (W x H x D)
  • Weight (Without Battery): 80 grams
    Manufacturer: Audio Technica

    We Also Recommend