Basket 0
Audio-Technica ATND8677 Stand

Audio-Technica ATND8677 Stand



  • £399.00
Usually shipped within 2-3 working days

The ATND8677 is a Dante-enabled microphone desk stand for use with any gooseneck microphone with a three-pin XLRM-type output connector.

The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications.

No longer relying on a standalone Dante audio interface, and benefiting from a switch and an indicator light, the ATND8677 connects directly to the audio network via a standard RJ-45 and a structured wiring port, ensuring high flexibility during installation and fast relocation.

Main Features

  • Microphone base for Dante™ system. Connects directly to the network via a standard Ethernet cable (RJ-45 Cat5 8P8C) - no need for expensive audio cable or soldering
  • XLRF entry for quick and easy connection of any XLRM gooseneck microphone
  • Local or remote control of low-cut UniSteep® filter, red/green LED status indicator and phantom power (P12)
  • Local or remote control of gain (+ 30dB / + 40dB / + 50dB / Mute) 
  • Scalable across 512 Dante™ bidirectional audio channels
  • Low-cut filter to reduce low-frequency ambient noise without affecting sound reproduction
  • Powered by the network (PoE - Power Over Ethernet)
  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
  • 5 years guarantee


          Frequency Response 20 - 20,000 Hz
          Impedance 1.4 kO
          Maximum Input Sound Level -10 dBu @ +30 dB gain / -20 dBu @ +40 dB gain / -30 dBu @ +50 dB gain
          Low Frequency Roll Off 80 Hz, 18 dB/octave
          Switches Local Mode: Touch-sensitive capacitive-type user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off;
          Low-cut filter: flat, roll-off;
          Gain: +30 dB, +40 dB, +50 dB;
          Phantom power: 12V DC, off
          Remote Mode: Low-cut and Gain via third-party software*
          Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa
          Phantom Power Requirements 12V DC
          Power Requirements PoE IEEE802.3af standard
          Weight 770g
          Dimensions 133.0 mm maximum length, 93.8 mm maximum width, 46.2 mm maximum height
          Output Connector 3-pin XLRF-type
          Physical level: standard Ethernet
          Dante network:Connector: single RJ45 | Cable quality: Shielded CAT5 or CAT6 recommended | Transmission speed: 100 Mbps

                            Manufacturer: Audio Technica

                            We Also Recommend