Menu
Basket 0

Alto Zephyr ZMX122FX

Zephyr ZMX122FX

Alto

  • £129.00
Usually shipped within 2-3 working days

The Alto Zephyr ZMX122FX is an eight-channel, two-bus mixer with all the inputs, outputs, routing, EQ, and effects you need for more intimate live performance reinforcement situations.

It features four microphone inputs with balanced TRS jacks (two with Phantom Power), a three-band EQ and two AUX sends on each of the four mono channels and the two stereo channels, and even two-track inputs for integrating audio playback devices. The ZMX122FX is a perfect, take-anywhere professional mixer. 

Specification:

  • Input Channels: Mono channels (Ch. 1 - 4)
  • Microphone Input: Electronically balanced, discrete input configuration 
  • Frequency Response: 20 Hz to 22 kHz, +/-1 dB 
  • Distortion (THD&N): ≦0.005% At +4 dBu, 1 kHz 
  • Gain range: 0 dB to 50 dB (Mic) 
  • Maximum Voltage Gain: 70 dB Ch. Mic input → Main Mix out & Tape out, 80 dB Ch. Mic input → Control Room & Phones, 60 dB Ch. Mic input → Aux send 
  • SNR (Signal to Noise Rate ): ≧110 dBu 
  • Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control
  • Line Input: Electronically Balanced 
  • Frequency Response: 20 Hz to 22 kHz, +/-1 dB 
  • Distortion (THD&N): ≦0.005% at + 4 dBu, 1 kHz 
  • Gain Range: 15 dBu to 35 dBu
Impedance
  • Microphone Input: 3.9 kOhms 
  • All Other Inputs: 10 kOhms or greater 
  • Tape Out: 1 kOhms 
  • All Other Outputs: 120 Ohms 
Equalisation
  • Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
  • Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz 
Alesis DSP Section
  • A/D And D/A Converters: 24-bit
  • DSP Resolution: 24-bit
  • Type of effects: Hall, Room, Vocal & Plate Reverbs Mono & Stereo Delay (max delay time 650 ms) Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus, Reverb+Flanger combinations
  • Presets: 256
Main Mix Section
  • Tape, Aux, Phones Output
  • Output level: 0 dBu Unbalanced, 1/4" Jacks, Max out +22 dBu Unbalanced, 1/4" jacks 
  • Noise (Bus noise): ≦-90 dB @ 20 Hz ~ 22 KHz (channel & Main level at 0 dB, other at minimum, DSP mute)
  • Power supply: 18 V, 1500 mA
  • Rated power consumption: 27 W 
  • Dimensions (WxLxH): 256mm x 250mm x 72mm
  • Weight: 5.07 lb

Manufacturer: Alto


We Also Recommend