Roland VC-1-SC Video Converter

The VC-1-SC (Up/Down/Cross Scan converter to/from SDI/HDMI) Video Converter provides uncompromising picture quality by maintaining the video characteristics of the original signal with rich-blacks and super-whites.

There are no interlacing artefacts or other conversion or signal errors sometimes found with other video converters.

The VC-1 features an on-board re-clocker to compensate for attenuation of SDI signals carried over long distances. Also supports both level A and B 3G-SDI, letting you connect a variety of higher quality SDI sources.

FEATURES:

• 3G (level A&B)/HD/SD/SDI
• HDMI in/out
• RGB/component in
• Composite in
• HDCP support
• Built-in frame synchroniser
• Audio embedding or de-embedding
• VC-1 RCS, PC/Mac control application
• Up/down/cross, frame rate, I/P, aspect ratio conversion

SPECIFICATION:

Input Connectors

• SDI
  • Connector: BNC type x 1 (Combined use with SDI Out Connector)
  • Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
• HDMI
  • Connector: Type A (19 pins) x 1
  • Signal Standard: HDMI HDCP support (When an HDCP-applied signal is input, output from the SDI OUT connector is stopped)
• RGB/Component
  • Connector: HD DB-15 type x 1
  • Signal Level: 1.0Vp-p (Y signal), 0.7Vp-p (R/G/B/Pb/Pr signals), 5VTTL (H/V signals)
  • Impedance: 75 ohms
  • Composite
• Connector: BNC type x 1
  • Signal Level: 1.0 Vp-p (Y signal), 0.286 V-p (C signal (NTSC)), 0.3 V-p (C signal (PAL))
  • Impedance: 75 ohms
• Analog Audio
  • Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio Out Connector)
  • Input Level: -6dBV
  • Maximum Input Level: +6dBV
  • Impedance: 22 k ohms
• Reference
  • Connector: BNC type x 1
  • Impedance: 75 ohms
  • Signal Format: Black Burst, Bi-level, Tri-level

Output Connectors

• SDI
  • Connector: BNC type x 2 (One is Combined with SDI In Connector)
  • Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
• HDMI
  • Connector: Type A (19 pins) x 1
  • Signal Standards: HDMI HDCP support
• Analog Audio
  • Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio In Connector)
  • Input Level: -6dBV
  • Maximum Output Level: +6dBV
  • Impedance: 2.2 k ohms

Processing

• Audio Embed/De-embed: 2ch
• Frame Synchronizer: Frame sync is activated when a reference signal is detected. When frame synchronizer is engaged, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available.
• Resolution Conversion: Selectable Full/LetterBox/Crop/Dot-by-Dot Type
• Frame Rate Conversion: Frame Skip/Repeat Type

General

• USB: USB Type B (Hi-Speed USB) x 1
• Power Supply: DC 9 V (AC Adaptor)
• Operation Temperature: +0--+40 degrees Celsius +41--+104 degrees Fahrenheit

Physical & Dimensions

• Width: 150mm
• Depth: 130mm
• Height: 30mm
• Weight: 500g

Manufacturer: Roland