Audio-Technica PRO35 Clip-On
PRO35
Usually shipped within 2-3 working days
Designed for saxophone, brass and percussion, the PRO35 is ideal in applications with high sound pressure levels and for stage performances.
It comes equipped with the UniMount® clamp, which allows for precise positioning, better impact resistance, and a good protection of the capsule.
Product Features
- Ideal microphone for sax, toms, brass and percussion
- Cardioid polar pattern improves isolation of desired sound source and reduces the pickup of sounds to the sides and rear
- Perfect for non-static stage performances
- Extended frequency response renders all the subtle nuances of a performance
- 80Hz low-cut filter on the power module
- UniMount® clip allows for precise positioning, providing impact resistance and protecting the capsule
- Gold plated corrosion-resistant contacts on the XLRM-type connectors
- Excels in applications with high sound pressure level
Product Specifications
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 50 - 15,000 Hz |
| Open Circuit Sensitivity | -45 dB (5.6 mV) re 1V at 1 Pa |
| Impedance | 250 ohms |
| Maximum Input Sound Level | 145 dB SPL, 1 kHz at 1% T.H.D. |
| Low Frequency Roll Off | 80 Hz, 18 dB/octave |
| Switches | Flat, roll-off |
| Dynamic Range | 115 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 64 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA typical |
| Cable | 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| Accessories Included | AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch |
Manufacturer: Audio Technica
