Audio-Technica ES947W/LED
ES947WLED
Usually shipped within 2-3 working days
The Audio-Technica ES947W/LED is a low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing.
Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module.
Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colours: black (ES947/LED) and white (ES947W/LED).
Product Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
- Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Self-contained power module with XLRM-type output connector
- Rugged all-metal case with a two-layer steel mesh grille
- Integral LED ring indicates mute status-green when mic is live, when muted red
- Isolators provide mechanical dampening of mounting-surface vibration
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Available in two colours: black (ES947) and white (ES947W)
Product Specifications
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
| Frequency Response | 40-13,000 Hz |
| Open Circuit Sensitivity | -40 dB (10 mV) re 1V at 1 Pa |
| Impedance | 200 ohms |
| Maximum Input Sound Level | 142 dB SPL, 1 kHz at 1% T.H.D. |
| Switches | Touch-sensitive control: on/mute |
| Dynamic Range | 114 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 66 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 5.7 mA typical |
| Weight | 66 g (2.3 oz) |
| Dimensions | 84.8 mm (3.33") long, 38.0 mm (1.49") diameter 48.0 mm (1.89") maximum width |
| Output Connector | Integral 3-pin XLRM-type |
| Accessories Included | One pair isolators |
Manufacturer: Audio Technica
