Menu
Basket 0
Martin Exterior Wash 300

Martin Exterior Wash 300

90507070/ MAR1119

Martin Professional

  • £3,749.00
Usually shipped within 2-3 working days

The Martin Exterior Wash™ 300 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges.

A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 300 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white.

FEATURES:

  • Powerful single colour R,G,B,W LED
  • Up to 10.000 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0 – 100% intensity control

SPECIFICATION:

General

  • Dynamic Effects
    • Intensity: 0 - 100%
    • Colour mixing: RGBW
  • Control and Programming
    • Control systems: DMX, RDM
    • DMX channels: 4
    • Setting, addressing, standalone programming: Control panel with OLED display
    • Receiver: RS-485
    • Firmware update: Serial upload via DMX link
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20
  • Optics
    • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
    • Light source: R, G, B and W single-colour LEDs
    • Beam angle options: 7°, 12°, 21°, 40°, 60°, 12° x 60°

*Figure obtained under manufacturer's test conditions

  • Photometric Data
    • Total luminous output: TBA
  • Construction
    • Protection rating: IP66
    • Colour: Light grey RAL 7035 Gloss 5, White RAL 9010 Gloss 7
    • Housing: Cast aluminium
    • Effective Projected Area (EPA): 0.14 m² including snoot
    • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
    • RoHS compliant
  • Installation
    • Orientation: Any
    • Mounting: Adjustable yoke
    • Vertical aiming: TBA
    • Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
  • Connections
    • Power connection: 1.8 m (5.9 ft.) cable tail without connector
    • Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
    • All cable entries: IP68 cable gland
  • Electrical
    • AC power: 100 - 240 / 277 V nominal, 50/60 Hz
    • Power supply unit: Integrated, auto-sensing multi-voltage
    • Power consumption, steady state, all LEDs at zero intensity: 6 W
  • Typical Power and Current
    • 120 V, 60 Hz: 2.3 A, 280 W, PF 0.99
    • 230 V, 50 Hz: 1.2 A, 280 W, PF 0.98
    • Measurements made at nominal voltage. Allow for a deviation of +/- 10%
  • Thermal
    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 45° C (113° F)
    • Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F)
    • Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F)
    • Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

Physical & Dimensions

  • Length: 283mm
  • Width: 404mm
  • Height: 439mm
  • Weight: 19.0kg

                Manufacturer: Martin Professional


                We Also Recommend