Menu
Basket 0
Martin Exterior Projection 500 Wide

Martin Exterior Projection 500 Wide

90506510/ MAR1083

Martin Professional

  • £3,880.00
Usually shipped within 2-3 working days

The Martin Exterior™ Projection 500 (Wide) is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs.

This fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it stands out for its energy efficiency, compact size and unlimited creative opportunities.

FEATURES:

  • Outstandingly bright 6500 lumens output
  • Powerful close-range and long-range projection
  • Flat-field, high-contrast image projection based on high-power LED engine
  • 4 layers of versatile dynamic effects (colours, gobo projection, gobo animation, prisms/frost)
  • Crisp image projection
  • Rugged IP66-rated housing
  • Minimal maintenance – low total cost of ownership

SPECIFICATION:

Dynamic Effects

  • Colour wheel: 8 interchangeable colours + open
  • Gobo wheel: 6 rotating gobos plus open, indexing, variable rotation
  • Gobo animation: Variable speed linear animation effect
  • Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
  • Frost (wash effect): Motorised variable
  • Focus: Motorised, variable 3 m (9.8 ft.) to infinity
  • Shutter: Strobe and pulse effects, instant open and blackout
  • Dimming: Electronic, constantly variable 0-100%, 16-bit control

Control and Programming

  • Control options: DMX, RDM, standalone
  • DMX channels: 13
  • Configuration, addressing and status: Onboard control panel with OLED display
  • Control resolution: 8-bit DMX control of each color
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20

Optics

  • Light source: 230 W white light LED engine
  • CRI (Color Rendering Index): 72
  • Colour temperature, EU models: 6700 K
  • Colour temperature, US models: 7100 K
  • LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions

Photometric Data

  • Luminous output: Up to 6100 lumens depending on beam angle variant

Construction

  • Housing: Cast aluminium
  • Finish: Hard anodised, metallic grey lacquered
  • Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
  • Ingress protection: IP66
  • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
  • Impact resistance: IK08 (with control panel display cover plate installed)
  • EPA (Effective Projected Area): 0.15 m2 RoHS compliant

Gobos

  • Suitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)
  • Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
  • Maximum image diameter: 23 mm (0.91 in.)
  • Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
  • Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)

Installation

  • Orientation: Any (sides must be kept vertical)
  • Mounting: Adjustable yoke
  • Minimum distance to illuminated surfaces: 0.5 m (20 in.)
  • Location: Suitable for wet locations. Do not immerse in water.

Connections

  • Power cable entry: IP68 cable gland
  • Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
  • Data cable entry: IP68 cable gland
  • Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical

  • AC power: 100-240/277 V nominal, 50/60 Hz
  • Power supply: Auto-ranging electronic switch-mode
  • Typical half-cycle RMS inrush current: 8.4 A
  • Idle power (zero intensity, no effects applied): 32 W, 0.3 A

Typical Power and Current

  • 110 V, 60 Hz: 320 W, 2.9 A, PF 0.977
  • 230 V, 50 Hz: 310 W, 1.4 A, PF 0.971
  • 277 V, 60 Hz: 305 W, 1.2 A, PF 0.950

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

  • Cooling: Convection, internal forced air
  • Maximum ambient temperature (Ta max.): 45° C (113° F) *
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)**

*Above this temperature, the fixture regulates output to protect from overheating.

**Power must remain applied at ambient temperatures below 0° C (32° F).

Physical & Dimensions

  • Length: 415mm
  • Width: 293mm
  • Height: 444mm
  • Weight: 15kg

All figures include mounting yoke

                      Manufacturer: Martin Professional


                      We Also Recommend