Martin Exterior Projection 1000

The Martin Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.

Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances.

FEATURES:

• Flat field, high contrast image projection based on high power LED engine
• 0-100% electronic dimming
• Full CMY colour mixing + additional colour wheel with 7 interchangeable colours
• 7 gobo slots for projecting graphic images (gobos included)
• Animation system for creating animated lighting effects (horizontal and vertical)
• Zoom range from 10° - 44° for exact projection on desired surface
• Variable frost for creating morphing effects and hybrid function as wash light
• 2 rotating prisms for creating abstract multi patterns
• Intuitive setup, configuration and stand-alone programming via graphical OLED display
• RDM and DMX control
• Fully weatherised IP66 fixture for permanent outdoor installation
• Fully convection cooling using heat pipes technology

SPECIFICATION:

Dynamic Effects

• Colour mixing: CMY, independently variable 0 - 100%
• Colour wheel: 7 interchangeable colours + open
• Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation
• Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction
• Prism 1: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
• Frost filter: Motorised, variable
• Zoom: 10° - 44° (cut-off angles)
• Focus: Motorised, variable 3 m (9.8 ft.) to infinity
• Shutter: Electronic, strobe and pulse effects, instant open and blackout
• Dimming: Electronic, constantly variable 0-100%, 16-bit control

Control and Programming

• Control options: DMX, RDM, standalone
• DMX channels: 20
• Configuration, addressing and status: Onboard control panel with OLED display or via RDM
• 8-bit control: CMY, colour selection, gobo selection, prism, frost, animation
• 16-bit control: Gobo indexing and rotation, zoom, focus and intensity
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20

Optics

• Light source: 440 W white light LED engine
• LED manufacturer: Appotronics
• CRI (Colour Rendering Index): 72
• Colour temperature: 6500 K (±250 K)
• LED lifetime: 20,000 hours (to >70% luminous output)*
• *Figure obtained under manufacturer's test conditions

Photometric Data

• Cut-off angle: 10° - 44°
• Luminous intensity:
  • At 10° zoom: 11,500 lumens
  • At 16° zoom: 15,000 lumens
  • At 40° zoom: 16,800 lumens

• Center Peak:
  • At 10° zoom: 731,000 cd
  • At 16° zoom: 311,000 cd
  • At 40° zoom: 42,000 cd

Construction

• Housing: Cast aluminium
• Finish: Hard anodised, white or metallic grey lacquered
• Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
• Ingress protection: IP66
• Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
• Impact resistance: IK08 (with control panel display cover plate installed)
• EPA (Effective Projected Area): 0.28m²

Gobos

• Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F)
• Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
• Maximum image diameter: 26 mm (1.02 in.)
• Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
• Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)*

*Gobos thicker than 2.5 mm require a shorter spring in the gobo holder

Installation

• Mounting: Adjustable yoke
• Minimum distance to illuminated surfaces: 0.5 m (20 in.)
• Orientation: Any (sides must be kept vertical)
• Location: Suitable for wet locations. Do not immerse in water.

Connections

• Power cable entry: IP66 cable gland
• Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
• Power cable type: EU models: H07RN-F 450/700V, Ø10 mm
• US models: SJTW 14AWG, 300V, Ø9.3 mm
• Data cable entry: IP66 cable gland
• Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical

• AC power: 100-120/200-277 V nominal, 50/60 Hz
• Power Supply: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 15.5 A
• Surge protection: 4 KV
• Idle power (zero intensity, no effects applied): 75 W

Typical Power and Current

• 120 V, 60 Hz: 645 W, 5.5 A, PF 0.98
• 230 V, 50 Hz: 635 W, 2.9 A, PF 0.95
• 277 V, 60 Hz: 635 W, 2.6 A, PF 0.90

Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Convection, internal forced air
• Maximum ambient temperature (Ta max.): 45° C (113° F)*
• Minimum ambient temperature (Ta min.): -30° C (-22° F)**

*Above this temperature, the fixture regulates output to protect from overheating.

**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F).

Approvals

• EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
• US safety: ANSI/UL 1598
• US EMC: CFR 47 Part 15 Class A
• Canadian safety: CSA C22.2 No 250.0
• Australia/NZ: RCM

Physical

• Height: 618 mm (24.4 in.)
• Length: 702 mm (27.7 in.)
• Weight: 50 kg (110 lbs.)
• Width: 417 mm (16.5 in.)

All figures include mounting yoke

Manufacturer: Martin Professional