Allen & Heath AHM-16
AHM16/240XAllen & Heath AHM-16 is an audio matrix processor for sound management and installation. It is designed for audio distribution, paging, conferencing and speaker processing in a multitude of environments including corporate, hospitality, education, event and multi-purpose venues, retail, theatres, cruise ships and sports venues.
The AHM-16 processor is complemented by an extended ecosystem of remote audio expanders, remote controllers, interfaces, apps and software.
A family of portable, rack-mountable or wallmount audio expanders is available with a choice of proprietary point-to-point Layer-2 or Dante transport protocols.
A range of IP remote controllers is available for volume control, music source selection, preset recall and more. AHM can also integrate with third party devices over GPIO, TCP/IP, or industry standard control systems. The Custom Control editor and app from Allen & Heath offer more control options and tailored user interfaces for multiple users and device types, with kiosk and BYOD capability.
Product Features
- 16x16 processing matrix
- 8x8 local analogue I/O
- I/O Port for expansion or audio networking, up to 128x128
- 16 configurable processing outputs – up to 16 mono / 8 stereo zones
- Sound management tools
- Automatic Mic Mixer
- ANC (Ambient Noise Compensation)
- Priority ducking
- 8-band PEQ, dynamics and delay on every input and zone
- Speaker processing with x-over filter, delay, limiter and PEQ
- 96kHz FPGA core with ultra-low latency
- Compatible with Allen & Heath IP1, IP6, IP8 remote controllers
- 2x2 local GPIO plus networkable GPIO interface
- Front panel screen and 4x programmable SoftKeys
- 4 user profiles
- Event scheduler
- Internal stereo playback
- Dante 96kHz optional cards (AES67 and DDM ready) Sold Separately
Product Specifications
Inputs
- Mic/Line Inputs: Balanced, +48V phantom power
- Mic/Line Preamp: Fully recallable
- Input Sensitivity: -60 to +15dBu
- Analogue Gain: +5 to +60dB, 1dB steps
- Pad: -20dB Active PAD
- Maximum Input Level: +30dBu (PAD in)
- Input Impedance: >3kΩ (Pad out), >8kΩ (Pad in)
- Mic EIN: -127dB with 150Ω source
Outputs
- Analogue Outputs: Balanced, Relay protected
- Output Impedance: <75Ω
- Nominal Output: +4dBu = 0dB meter reading
- Maximum Output Level: +21dBu
- Residual Output Noise: -92dBu (muted, 22-22kHz)
System
- Measured balanced XLR in to XLR out, 20-20kHz, +5dB Gain, Pad out, signal @ 0dB (meter)
- Dynamic Range: 108dB
- System Signal to Noise: -92dB
- Frequency Response: 20Hz - 20kHz +0/-0.5dB
- THD+N (analogue in to out): 0.005% @ +16dBu output, 1kHz +5dB gain
- Headroom: +18dB
- Sampling Rate: 96kHz +/- 20 PPM
- Acoustic Noise: Typical loading, 22 deg C ambient
- No I/O Port installed: 31dBA
- With I/O Port installed: 33dBA
Physical
- AHM-32 - without box
- Width: 482.6mm/19"
- Depth: 270mm/10.63"
- Height: 44mm/1.73"
- Weight: 3.8kg/8.38lbs
- AHM-32 - with box
- Width: 555mm/21.85"
- Depth: 385mm/15.16"
- Height: 150mm/5.9"
- Weight: 5.1kg/11.24lbs
- Operating Temperature Range: 0 deg C to 40 deg C (32 deg F to 104 deg F)
- Mains Power: 100-240V AC, 50-60Hz, 70W max
Manufacturer: Allen & Heath