Martin Exterior PixLine 20 RGB 310mm

The Martin Exterior PixLine 20 310mm is a  linear LED video fixture for media facades and creative installations.

This Exterior PixLine 20 can be combined with a wide variety of lenses and diffusers for the right look for every application.

The Exterior PixLine 20 is driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX for smaller setups..

FEATURES:

• 20 mm pixel pitch
• 125 cd per meter calibrated
• 80 lumen per foot calibrated
• High-quality 16-bit per colour image processing technology
• Pixel-level brightness and colour calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system

SPECIFICATION:

General

• Control and Programming
  • Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
  • Protocol detection: Automatic
  • Control modes: RGB, basic, segment and pixel-level
  • DMX channels: 3/10/13/31/55/199
  • Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each colour
  • Color and intensity calibration: Pixel-level
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20
  • Firmware update: Via Martin P3™ System Controller
• Control/User Interface
  • Device status: Multi-colour visual indication
  • Device test and reset: Magnetic push button to call up local test patterns and reset device
• Optics
  • Type: Clear Front
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer’s test conditions

• Photometric Data
  • Colour resolution: 16 bits per colour (48 bit per pixel)
  • Viewing angle: 120° x 120°
  • Pixels per meter: 50
  • Pitch (pixel centre-to-centre): 20.00 mm
  • Luminous intensity, calibrated mode: 125 cd per meter*
  • Total output, calibrated mode: 375 lumens per meter*
  • Total output, calibrated mode: 4 166 nits (modules spaced 30 mm centre-to-centre)*

*Preliminary data, figures are approximate

• Video Processing
  • Brightness control
  • Gamma correction and control
  • Colour temperature control
  • Colour space control
  • Calibration processing
  • Synchronisation
• Signal Protocol
  • P3 (via Martin P3™ PowerPort) or DMX
• Construction
  • Base: Extruded aluminum profile
  • Colour: Clear anodized
  • Protection rating: IP66
  • Impact resistance: IK05
  • RoHS compliant
• Installation
  • Orientation: Any
  • Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
• Connections
  • Power and data input: 6-pin custom (BBD) IP66-rated
  • Power and data thru: 6-pin custom (BBD) IP66-rated
  • Hot plugging compatible
• Electrical
  • Nominal input voltage: 48V DC +/- 4%
  • Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP or generic 48 VDC PSU
  • Max. total power consumption: 17 W per meter (at max. intensity, full white)
• Thermal
  • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 55° C (131° F)
  • Minimum ambient temperature (Ta min.): -20° C (-4° F)
  • Total heat dissipation (calculated, +/- 10%): 55 BTU/hr per meter

Physical & Dimensions

• Length: 310mm
• Width: 27mm
• Height: 32mm
• Weight: 0.4kg

Manufacturer: Martin Professional