Martin Exterior Wash 200
90509087/ MAR1109
Usually shipped within 2-3 working days
The Martin Exterior™ Wash 200 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades.
A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.
The Exterior Wash 200 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white.
FEATURES:
- Powerful single colour R,G,B,W LEDs
- Up to 6650 lumens at full white (RGBW)
- Six different beam angle options
- Internal power and control (DMX, RDM and OLED display)
- Rugged IP66 housing
- 0–100% intensity control
SPECIFICATION:
General
- Dynamic Effects
- Intensity: 0 - 100%
- Colour mixing: RGBW
- Control and Programming
- Control systems: DMX, RDM
- DMX channels: 4
- Setting, addressing, standalone programming: Control panel with OLED display
- Receiver: RS-485
- Firmware update: Serial upload via DMX link
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Optics
- Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
- Light source: R, G, B and W single-color LEDs
- Beam angle options: 7°, 12°, 21°, 40°, 60°, 12° x 60°
*Figure obtained under manufacturer's test conditions
- Photometric Data
- Total luminous output: TBA
- Construction
- Protection rating: IP66
- Colour: Light grey RAL 7035 Gloss 5, White RAL 9010 Gloss 7
- Housing: Cast aluminium
- Effective Projected Area (EPA): 0.1 m² including snoot
- Impact resistance: IK08 (with control panel display cover plate installed)
- Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
- RoHS compliant
- Installation
- Orientation: Any
- Mounting: Adjustable yoke
- Vertical aiming: TBA
- Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
- Connections
- Power connection: 1.8 m (5.9 ft.) cable tail without connector
- Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
- All cable entries: IP68 cable gland
- Electrical
- AC power: 100 - 240 / 277 V nominal, 50/60 Hz
- Power supply unit: Integrated, auto-sensing multi-voltage
- Power consumption, steady state, all LEDs at zero intensity: 3 W
- Typical Power and Current
- 120 V, 60 Hz: 1.4 A, 170 W, PF 0.99
- 230 V, 50 Hz: 0.8 A, 170 W, PF 0.95
Measurements made at nominal voltage. Allow for a deviation of +/- 10%
- Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 45° C (113° F)
- Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F)
- Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F)
- Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
Physical & Dimensions
- Length: 270mm
- Width: 334mm
- Height: 382mm
- Weight: 13.0kg
Manufacturer: Martin Professional